What Is a Roofer?

Roofers In South Jersey is a person who constructs, replaces, or repairs roofs. They may be licensed roofing contractors, general contractors who do roofs, or employees of a roofing company.

Working roofers typically enjoy physical, athletic, or mechanical tasks. They also tend to be realistic individuals who are independent, stable, and persistent.


Roofers are responsible for installing, repairing, and maintaining various types of roofing to protect buildings from weather conditions. They often work as a team and must collaborate with other construction professionals. They must also ensure their work is done safely and to the project’s specifications. They may perform routine maintenance tasks such as cleaning gutters and removing debris from the worksite. Roofers typically have excellent customer service skills, often interacting directly with their employer’s clients.

Generally, roofers work full-time and are available for overtime during busy periods. They can usually find a job with their local union or through a roofing contractor. They must wear personal protective equipment such as a hard hat and safety glasses and follow strict health and safety guidelines when working at heights.

The primary duties of a roofer include:

  • Tearing off existing shingles.
  • Inspecting the sheathing.
  • Repairing or replacing it when necessary.
  • Installing new roofing materials.

They must be able to follow blueprints and diagrams to complete their work correctly. In addition, they must be comfortable working at heights and have good customer service skills.

Roofers must take courses yearly to keep their certifications up-to-date and improve their skills. They must also be competent at using hand tools such as hammers and shears. Additionally, they must be able to stand on ladders and scaffolding for long periods.

As a result of their duties, roofers are typically required to travel to different locations to complete their work. Additionally, they must be able to work in all weather conditions. Moreover, roofers must be able to read and write, as they are often required to sign paperwork for their work.

A high school diploma or GED is the minimum requirement for a career as a roofer. However, many roofers receive on-the-job training from their employers. Union members can also become certified as journeyman rooers through an apprenticeship program.

Roofers are responsible for a vital part of the structure of buildings. They install and repair roofs, including cladding and lead sheeting. They also re-slate and tile roofs and fit skylight windows. In addition, they determine the material, substrate, and supportive accessories to be used in roofing installations. They work on both new installations and renovations and roof repair projects. Often, they must be prepared to work in wet conditions or when the weather is unfavorable for outdoor work.

There are no set qualifications for becoming a roofer, but the profession requires good physical health and balance. Most roofers gain their occupational skills through on-the-job training, which lasts about three years. They begin as helpers and learn to use tools and equipment during this time. They then move on to more difficult tasks, such as laying and cutting materials. Some roofers pursue an apprenticeship program, which typically lasts about four years and combines on-the-job training with classroom instruction.

Courses in workshops, mechanical drawing, and basic mathematics are helpful for those who want to enter this career path. In addition, those interested in working on roofs should take safety courses focusing on their work and the risks involved. Various organizations, such as the Health and Safety Executive, offer these courses. In addition, roofers must be able to read technical plans and understand construction principles.

Some roofers advance in their careers by becoming supervisors or estimators for roofing contractors, while others become contractors. The latter may have to obtain a state license, depending on their location. Those with the right knowledge, experience, and training can expect a long and rewarding career as a roofer. The job has been described as one of the most rewarding trade careers, owing to its many challenges. Those who enjoy working with their hands and who can follow detailed instructions will be the best suited for this occupation.

Roofers must work in extreme weather conditions (heat, wind, and snow) for prolonged periods. They must also be able to perform physically demanding feats daily and be willing to climb ladders to various heights to load and unload materials and equipment. They must be able to use hand tools such as shovels, rakes, hedge trimmers, and shears. Roofers also re-slate and tile roofs, fit skylight windows, and repair lead sheeting and cladding.

In terms of salary, a roofer can make between $32,590 – $64,600 based on experience and domain knowledge. Typically, they earn a base salary and annual incentives.

This salary information is based on data from 329 TurboTax users who identified their occupation as Roofer. This estimate includes taxable wages, tips, bonuses, and other non-taxed income. It does not include employer contributions to retirement plans, health insurance, or other benefits.

Roofers are in demand in many regions and cities due to the high damage rate caused by severe storms. However, the number of jobs available will depend on the overall economic conditions. Areas with more building construction will require more roofers, while areas experiencing a recession may see job losses.

The average salary of a roofer is $52,864. Some ways to increase your pay include changing employers, gaining more education, and managing other roofers. Advanced skills will allow you to charge more for your services and qualify for promotions. Also, being a union roofer increases your earning potential. Unions negotiate with employers to provide better wage and benefit packages than non-union companies. They can also offer more stability in the workforce, which is important for younger roofers who have yet to establish themselves as professionals.

The most important day in the life of your new roof is when a professional roofing contractor installs it. This job must be done correctly to ensure your home is safe and secure for years. If you’re planning a roof replacement, there are several things to consider before selecting a contractor.

First, ensure your roofing contractor has all the necessary permits from the city and county. This includes any special homeowner association or architectural review board permits that may be required for your area. These permits will let your contractor know what materials and colors are allowed in your community. You don’t want your roof replaced only to discover that your chosen material isn’t allowed in your neighborhood.

Also, ask your contractor if they have a permanent business location. This is a good indication of their level of professionalism and commitment to quality service. Requesting workers’ compensation and general liability insurance proof would be best. This will protect you from being held liable if the roofing contractor is injured.

The first step in the roof replacement is removing your old shingles and underlayment. The roofing company will then set up protection for your property, including moving any vehicles in your driveway or garage that could get damaged by falling shingle debris. You should also carry outdoor furniture or ceramic landscaping features close to your roof’s edge.

Before installing your new roof, the roofing contractor will inspect the flashing around the edges of your house, roof valleys, and any vents or chimneys. The flashing is made of aluminum or galvanized steel and covers the joints between your home and roof to prevent water leaks. The roofing company will replace or repair any leaking, cracked, rusted, or missing flashing.

Next, the roofing contractor will lay a protective asphalt roofing paper over the sheathing. This is normally tacked or stapled in place. Asphalt shingles last 20 to 25 years and are the most common choice for homeowners. They are durable, inexpensive per square foot, and available in various color options. Wood shingles have a lifespan of 30 to 50 years and are suitable for different architectural styles.

Most roof installation and replacement projects are covered, at least partially, by manufacturers’ warranties or product guarantees. These cover the materials used in the roof for their typical lifespan. They may also include coverage against damages caused by certain weather events. However, you should be aware of the limitations and exclusions of manufacturer warranties.

The type of warranty you choose will be determined by the roofing material and contractor you select. For example, a roof that uses architectural shingles will have a longer guarantee than a three-tab shingles roof. In addition, many manufacturers offer additional product warranty plans that extend their standard warranties beyond a typical lifetime. These extended warranties typically cost more but offer a higher level of protection.

Whether or not you purchase an extended warranty should be part of your initial budgeting process. A good roofer can help you determine the value of an extended warranty and explain the terms and conditions. You can even compare prices between different contractors and manufacturers to find the best deal on a warranty plan for your roof.

Many homeowners need clarification on manufacturer warranties with quality and material warranties. While these are similar in some ways, they differ in how they protect the homeowner. For example, a manufacturer’s material warranty will guarantee the materials for their typical lifespan but does not cover labor to replace or repair them. On the other hand, a roofer’s quality warranty will protect the homeowner from any installation errors and is valid for a specific length of time.

Purchasing an extended warranty is a way to make your investment in a new roof last longer and to protect your home from unexpected repairs. However, you must be careful to read the fine print and ensure that you are working with a qualified contractor to provide the services you require. It is important to remember that specialist contractors are almost always more reliable and will provide you with a better warranty than jack-of-all-trades companies.

pro deck builders
Deck Building

Building a Deck? Follow These Home Deck Building Guidelines

Homeowners increasingly want the room to entertain. Pro Deck Builders Charleston provide a good spot for separate dining, entertaining, and living areas. If you decide to build a deck, follow the International Residential Code guidelines and local changes that apply. Start with scaled drawings to clarify your design ideas and avoid mistakes. The next step is to attach the ledger board, using flashing to prevent water damage to your house.

pro deck builders

The ledger board is a structural component of a deck that connects the structure to the house. It must be strong enough to support the intended live load, provide stability, and prevent the deck from falling away from the home. The ledger board is bolted to the house’s rim joists and must be properly sized and fastened to avoid rot. If a deck is built without a proper ledger, the structure may sag or fall away from the house, potentially causing serious injury.

The best material for a ledger board is pressure-treated lumber, which has been treated with chemical compounds that help protect it from insect infestation and fungal and bacterial growth. It must be straight, with no splits or cracks allowing moisture to seep through and rot the wood. Ideally, the length of a ledger should be three inches less than the width of the deck framing to allow the end joists to overlap the log. It should also be a uniform thickness to ensure the proper load-carrying capacity.

During deck-building, a professional uses joist hanger brackets to attach each floor joist to the ledger board. Joist hangers are designed to hold the full weight of the deck, so they must withstand shear and tensile or compressive loads. The on-center spacing of the joist hangers should be calculated based on the joist length, and they must be securely fastened to the ledger with appropriate screws or bolts.

When the deck is finished, a metal flashing is installed over the top of the ledger and the house wall to prevent rainwater from entering and rotting it. A deck builder should use corrosion-resistant fasteners and apply a waterproof sealant along the flashing, the ledger board, and the holes in the siding to prevent water leakage.

Selecting a qualified contractor to build your deck is important to avoid potential injuries and costly repair bills. Check a contractor’s references to ensure they have the experience to make a problem-free deck and give you value for your money. A good builder will understand the importance of a properly constructed deck and take the time to complete the work properly, according to industry standards.

Joist hangers are hardware tools that support joists from below and connect them to the deck ledger board or header board. These metal connectors come in various shapes and sizes to fit different beam framing configurations. They are available at most hardware stores, lumber yards, and online. They can be purchased in sets as well as individually. When purchasing joist hangers, double-check that they are the right size for your project and designed to fit the type of lumber you will use. It helps ensure that your entire structure will be up to code. Joist hangers are typically constructed from galvanized steel, which resists rust and corrosion over time. They can be attached with nails or screws, depending on the design of the joist hanger.

When attaching joist hangers, always use fasteners matched to the specified nail or screw size for that particular connector. It helps ensure that the connection is strong and safe. Hammering or drilling the pins in straight, perpendicular lines is also important. If you whip or drill in a diagonal line could result in a weak connection.

You must refrain from improvising when installing joist hangers. Modifying the hanger in any way voids the manufacturer’s warranty and may cause structural problems. For example, if you cut or bend the leg of a joist hanger, it will not hold up to the load requirements of your deck.

To install a joist hanger:

  1. Please place it in the desired location on the deck frame.
  2. Attach a piece of scrap two-by-eight to the free end of the hanger, closing up the side resting on the deck ledger board or header board.
  3. Nail the joist hanger to the two-by-eight with nails that match the specifications of the connector.

Once the joist hangers are in place, you can frame the rest of the deck. Begin by installing the rim joists, the boards that butt up to floor joists, and wrap around the edge of the deck. Then, install the side joists and corner joists. Lastly, finish the deck with the fascia boards and stair stringers.

In the same way, houses need solid walls to protect their occupants from the elements — rain, cold, snow, and wind — backyard decks need posts to support their structures. Post and beam construction enables designers to build decks with architectural features like arches and curved stairways that demand more structural strength than conventional stick-framed wall framing can provide.

Posts can be set in the ground or on a footing that supports them aboveground. Purchased precast concrete pier footings are the easiest to install, but pouring your own on-site is also possible. Either way, you’ll need to dig holes and test for underground utilities before starting.

Once the footings are in place, it’s time to start setting the posts. First, you’ll need to mark each location with stakes driven into the ground. Use Mason’s twine tied between each stake to establish an outline of the perimeter of your deck. Make sure the corners of the system are square. If not, you’ll need to adjust the position of one of the corner stakes until it is exactly 5 feet from the other side of the outline (consult your deck plans).

Before you start digging holes for the posts, take the time to call 811. It will prevent you from damaging any underground pipes and helps ensure the crew that drills the holes will find them. Once you have marked the locations of the posts, backfill the soil and tamp it down. It will help prevent the bars from moving once you start installing joists and other components of your deck.

If your deck plan calls for the posts to be set outside the joists, install a ledger board and rafters to keep them in place. A temporary 2-by-4 brace tacked to the batter boards can keep them upright until you install the deck rails and other finishing touches.

If the post is to be inside the joists, you’ll use special steel framing connectors (such as Simpson Strong-Tie or USP) that fasten to the deck joists and the base plates of the posts. Because these connectors must resist the forces of expansion and contraction that cause wood to expand and contract, they must be properly installed and fastened.

If your deck is on the ground, it will probably not require railings. However, if it is above the ground and accessible from your house, you will want to build stairs or railings. It will complicate your project, and you will have to use a lot of lumber, but it can be done if you are patient and careful.

Begin by locating the area where you want to build your deck. Temporarily stake the place with twine. Next, mark the outer corners with stakes. Sketch your deck, including stairs and landings, if required. Take your drawing to the local lumber retailer and have them help you put together a materials list. Remember to include 10% for trim waste and bad boards, if needed.

Most communities require a permit for decks that are more than 200 square feet in size, 30″ or more off the ground, or that serve as a door to the house. It is also a good idea to check with your city building department and determine the specific code rules for your community.

A deck is a great place to spend time outdoors with family and friends. If you are building a deck for entertaining, consider including built-in bench seating, railings, and planter boxes to make the space even more useful. You may also want to add a grill or smoker and a table for eating or playing games.

Before beginning construction, check the site for underground utility lines and other potential problems that could complicate or delay your deck project. If you are building a raised deck, getting a professional engineer to sign off on the design is very important to ensure it will be safe and structurally sound.

Unless you are an experienced woodworker, you should hire a contractor to do the major structural components of your deck. A contractor will also be able to help you with other details that can enhance the appearance of your deck. It includes adding a variety of post caps to your rail posts, which can be made from metal, glass, and other materials. Some builders bevel the tops of the post caps for a stylized look.

fence contractor

How To Choose A Fencing Contractor

A fence is a great way to add some privacy and security to your home. It also raises the value of your property.

Before you hire a fencing contractor, do your research first. Look at online reviews and recommendations from people you know. Also, look at their insurance coverage. Check here at to talk about your fence project.

fence contractorExperience

Depending on the state in which you live, there may be some specific licensing requirements for fencing contractors. Before you begin, check with your local business registration division to learn more about the specifics of your area’s laws. Additionally, you should also check with the zoning division of your city to see if there are any restrictions on your business. Once you have this information, you can then determine the type of business structure that will work best for your situation.

If you’re looking for a reputable fence contractor, try to find one who has been in the business for a long time. This will ensure that they have a good track record and can be trusted to complete the job on time and within budget. You can also ask them about their previous work and customer testimonials. In the 21st century, it’s easy to find out if a company is legitimate by reading customer reviews on multiple platforms.

Another thing to look for is whether the contractor is a member of any professional organization. This shows that they are committed to providing quality workmanship and upholding ethical standards. In addition, checking the company’s rating can also give you a good idea of their level of professionalism.

Before hiring a fencing contractor, make sure that they are licensed and insured in your state. This will protect you if they get injured while working on your property. In addition, you should always choose a contractor who uses high-quality materials. This will help to ensure that the fence will last for a long time. Additionally, a reputable fence contractor should be willing to fix any issues that may arise after the job is completed.

When interviewing fencing contractors, you should also ask them to provide a written estimate for the project. This will allow you to compare estimates from different companies and choose the best one for your needs. In addition to a price, the estimate should include a detailed description of the work and how it will be performed. If a fencing contractor refuses to provide a written estimate, it’s probably best to look elsewhere.


While you may think that a fence contractor is just about wielding a hammer and installing beautiful fences, the truth is that it takes a lot more to be a licensed fencing contractor than that. To start with, you need to jump through a few hoops. Brace yourself for paperwork and regulations more obscure than your neighbor’s love of lawn gnomes.

After rustling up your paperwork and proving that you’re the real deal, it’s time to face the licensing exam. It’s not going to be a high-noon showdown, but you will be quizzed on construction codes and fence installation techniques. The best way to prepare for this exam is to study for it as soon as possible.

Having a license will also help you win more contracts and provide better services to your customers. Moreover, it will prove that you are a professional who follows the construction rules of the letter. This is crucial for anyone who wants to build a career as a fence contractor. In addition to a license, you should also have strong physical strength and stamina as well as business management skills.

It is important to find out whether the fencing contractor you are considering has a valid business license and is insured. In the event of an accident, insurance will cover the cost of medical bills and lost income. This will provide you with peace of mind and will allow you to focus on your work.

In addition, look for a fencing contractor who is a member of a professional organizations. This will demonstrate that they are dedicated to the industry and committed to providing quality service. You should also ask about their experience in the industry and how many projects they have completed. A good number of successful projects should indicate that they have a proven track record.

When choosing a fencing contractor, be sure to get references from previous clients and check the licenses and permits they hold. In addition, you should always be sure to get a written estimate of the project before hiring them. This will ensure that there are no misunderstandings later on.


When choosing a fencing contractor, make sure they have the proper insurance to protect you and your employees. In addition to workers’ compensation and general liability, they should also have commercial property insurance to cover their equipment in the event of a loss. They should be able to show you proof of these policies upon request.

If a worker causes damage to your property during fence installation, commercial general liability will pay for repair costs. This type of policy also pays for defense costs if a third party sues your business. Fence installers may also need a business owner policy (BOP) that bundles general liability and property insurance into one cost-effective package.

Fence installers often work with heavy equipment and tools that pose a risk of damage or theft. Tools and equipment coverage is an optional add-on to general liability that will pay for replacement or repairs if your tools are stolen or damaged while in a vehicle, at a job site, or stored at a business location.

Workers’ compensation will pay for medical expenses if your employees are injured on the job, such as back injuries or cuts. It will also cover lost wages while they recover from their injuries. A fence company insurance plan should include workers’ comp because it is the law in most states.

If your employees drive to customer sites in their vehicles, a commercial auto insurance policy will cover these cars against collision and non-collision risks such as vandalism or theft. This policy can even help pay for your expenses if your business is forced to close because of a covered event such as a fire.

A business interruption insurance policy will cover your business expenses if a covered event prevents you from working, such as a fire or severe weather. This insurance can pay for your lost revenue and the extra expenses you incur to keep your business running, such as rent for a temporary space. It can also cover your employee’s wages if they have to work from home while the business is closed.


When looking for a fence contractor, you want one who has an excellent reputation with their clients, suppliers, and other contractors. If a contractor has an excellent reputation, it means they’re trustworthy and will do what it takes to make sure the job is done right. This is especially important for a large project, such as installing a fencing system in your yard.

One way to get a sense of the quality of a fencing contractor’s work is to look at their previous jobs and customer testimonials. You can do this by performing a simple online search on the company name. This will bring up many different results, all with reviews and feedback from other customers. Read these reviews carefully to see if they’re worth your time.

Another important question to ask a potential fencing contractor is whether or not they’re members of any professional organizations. Being a member of a professional organization is often a good sign that the company is reputable and committed to doing high-quality work. It’s also a good idea to find out if the company offers any guarantees on their work.

In addition, you should always find out if the company will take care of all necessary permits for your installation and if they’ll be calling 811 before digging to locate any utility lines that might be in the area. Finally, it’s a good idea to compare prices between a few contractors before making a decision. However, be careful not to base your decision solely on price; the quality of the materials used can have a big impact on the final cost. It’s also a good idea that you get quotes in writing so that you can understand exactly what each contractor is offering.

HVAC Services
HVAC Services

How to Save Money on Air Conditioning Repair

If your AC unit is not cooling the building properly, it may be because the condenser fan isn’t spinning. This can happen after it has been inactive for a while. Try poking a stick or screwdriver through the condenser grill to check whether the fan is spinning. You can suspect a more significant problem if it spins when you poke it. HVAC Services

Air conditioning repair can repair the parts or install a hard start kit to prevent the unit from overheating and failing to cool your home. It’s a simple process, but if you can’t figure out why your unit is not working correctly, consider the following common causes. A dirty air filter or faulty wiring could cause the problem. A broken motor bearing could also be the culprit. If you experience this problem, call a professional to repair the unit.

When your AC requires maintenance, the technician will check all components thoroughly. This includes checking the refrigerant level and pressure levels. Having the right refrigerant level can prevent potential short circuits and other malfunctions. The technician will also examine the condensate lines, which move excess moisture generated by condensation. In addition, the technician will calibrate the thermostat. This is important for accurate reading of the temperatures.

A thorough air conditioning maintenance can extend the life of your HVAC system. A trained technician can detect many problems before they become major ones. A tune-up typically costs around $100 and includes various tests to ensure the system parts are working properly. They will also check the filter, charge the refrigerant as necessary, clear the drain, and clean the unit inside and out. A well-maintained system will last a decade or longer without the need for major component replacement.

It would be best if you also got a professional opinion before making any decisions. It would be best if you also were sure to ask about the cost. For instance, a service call can cost up to $60, while installing fresh refrigerant can cost as much as $400. It is important to get three written estimates before choosing a company. You should also check the company’s licensing, bonding, and liability insurance. In addition, ask about their maintenance program or monthly specials.

A professional air conditioning repair service will test the equipment and add refrigerant if necessary. They can also pressurize the air conditioning unit to ensure optimal cooling. As a rule, the air conditioning cools space through condensation that flows away from the unit. However, some older units can’t handle high outdoor humidity, leading to moisture backup or condensate drip pan clogging. This can compromise the AC’s performance.

Regarding air conditioning repair, maintenance contracts can provide many benefits. They can save you money and help you maintain the efficiency of your AC system. Many maintenance contracts include parts and maintenance and cover the equipment for up to 365 days. While they might not seem like a good deal at first, you can often work out the savings by figuring out how much it will cost you not to have the services performed regularly.

Service contracts give you priority treatment by HVAC companies, which can help you to get your service appointments quickly. This can be especially helpful during the hot months of summer and winter. You can also expect priority service on unscheduled service calls. These service contracts can also offer protections against expensive repairs, which many local services do not offer.

An AC service contract can save you money on annual inspections and repairs. Sometimes, these plans even cover the cost of replacing or repairing factory warranty items. In addition, some service contracts offer scheduled service reminders so you can plan for yearly maintenance. By following these steps, you can be sure your AC system will stay in good working order for many years.

HVAC maintenance contracts should cover the parts and labor costs for regular inspections and service calls. The service technician will thoroughly inspect the equipment and perform tests. Moreover, the technician will replace worn parts and clean the components as necessary. The frequency of these maintenance visits will depend on the type of equipment and the operating conditions.

AC systems are prone to problems during summer because the air filters tend to get clogged very quickly. The filter should be changed every two weeks during peak seasons. Some AC controllers have a feature that will alert you when the filter needs to be changed. A dirty air filter can cause the system to work less efficiently and produce more costly repairs. Dirty air filters also prevent the air from flowing freely, leading to a home not cooling down properly.